NU Putty
- Berger NU Putty is a ready-to-use high-quality putty for interior use only. It forms an ideal base to give a smooth finish for water-based paints. It should not be used on exterior surfaces.
- Ready-to-use NU Putty is highly recommended where smooth performance is required. NU Putty is designed for use on cement surfaces, concrete, chipboard, plywood, etc.
- NOTE: It is recommended that NU Putty should be coated with a thin coat of Berger Plastron Primer if the subsequent finish to be applied is VIP Super Gloss Robbialac Enamel or All-Rounder Matt Finish Enamel.
- It is extremely essential to completely dry and free the surface from grease, dirt, and dust by using sandpaper or scrapers before applying NU Putty.
- NOTE: It is recommended that on previously painted surfaces, scrape to remove all old paint that is loose and flaking and apply a thin coat of Berger Plastron Primer before applying NU Putty for a better finish.
NU Putty under normal conditions surface dries within 2 hours and is ready for overcoating with finishing paint after 16 hours.
NU Putty covers 5-7 meters square per kg per coat.
Talha haroon
Very good product of berger paints
Danish Ali
“Berger Paints’ quality speaks for itself. Used their paint for my kitchen and it’s easy to clean, making it perfect for high-traffic areas.”